The article source: http://www.yantaidp.com 1, epoxy floor paint coating itself causes leveling of the paint, the viscosity of the coating is too high. Thixotropic fillers or additives. 2, construction reasons: construction method is wrong, long construction time, paint stirring drum surface treatment error, the coating is too thin. Tool reason: drum quality failed roller surface treatment error. Solution: 1, the reason of the coating, increasing Epoxy paint coating leveling, to reduce the viscosity of the coating, to minimize the thixotropic fillers and additives, with particular attention to the leveling agent used Wallcovering phenomenon floor coatings. 2, note that the construction methods, the paint aging time not too long. Drum end to the fillet over and thickness of the coating as much as possible not to be less than 0.15mm. 3, with better drum, drum before use tape to deal with the drum surface. Yantai Naidu floor Engineering Co., Ltd. Main Products: the Yantai floor, concrete sealer, epoxy flat coated floor paint, Yantai floor paint, epoxy mortar floor paint, epoxy self-leveling epoxy type floor the paint, emery resistant floor, ultra plains Ping wear hardened class floor. Undertake: Epoxy Floor Yantai, Yantai garage floor, Yantai parking floor, Yantai anti-static floor, Yantai curing agent floor, Yantai resistant floor, Yantai over plains Ping floor renovation Yantai, Yantai floor from Sand repair flooring project.